-
Lock On Tire Air Chuck
Part # AC2073
● Revers angle dual head lock-on air chuck fits standard automotive wheel with Schrader valves and can be applied to fill a variety of tires, including car, van, bus, pick-up, tractor, truck and heavy vehicle.
● The angled push-pull chuck has 2 connection points: straight head is specially designed for inner/single wheels valves whose stem is outwards, and 30 degree reverse head for outer wheels whose valve stem is inwards. So it can access hard-to-reach valves.
● The angled air chuck has the option of a closed or open flow type. The closed type is constructed with built-in shut-off valve to hold air back until it is pressed onto a valve stem. This should be used with air compressors or air supply systems without a valve between the air source and the tire chuck. When used as the inflating tip for a tire inflator or tire gauge, it has to be the open flow type air chuck so that your inflator or gauge will not be broken.
● The dual head is made of zinc alloy, and steel cap with chrome plated which offers better corrosion resistance.
● The 6 inch / 150mm long stem and dual head chuck body is coated with polyurethane for rust free and help you to reach inner wheels while keep your hands clean.
● Max pressure of 150 pounds per square inch
● The inlet features 1/4” NPT female thread with 5/8” or 16mm hexagon terminal, compatible with any air source with relative male thread adaptors.
● Both straight head and angled reverse head could lock onto tire valve thread.
-
Ball Foot Chuck
Part # AC2098
● Ball foot chuck is designed to mount directly to Schrader valve stem, such as tire valve, air tank.
● The ball foot chuck is constructed with a built-in shut-off valve to stop airflow when chuck is not in use, and air flows only when the unit is engaged with valve stem.
● Hose barb is suitable for 1/4″ inner diameter hose.
● Ball foot chuck features Zinc alloy body with chrome plated, which provides more sturdy, corrosion resistance and wear resistance. Brass cap and valve makes it more durable even there is moistures in compressed air.
● Maximum air pressure of 150 pounds per square inch or 10 Bar.
● Open type for inflator gauge is also available. Close type is only for air line.
● Minimum order quantity: 2,000pcs.
-
Dual Head Tire Chuck
Part # AC2097
● Dual head tire chuck is made of zinc alloy and brass. And push-pull dual head is specially designed for hard-to-touch valves when valve is facing inward.
● This dual head tire chuck is available for both closed flow and open flow. The closed type is designed with built-in shut-off valve for air line, which will shut down the air flow and air flows only the chuck engaged with tire valve stem. The open flow type is designed for tire inflator gauge or air pump.
● The dual head tire chuck features 1/4″ female NPT or BSP inlet with 5/8″ / 16mm hex connector, compatible with most air hose, tire inflator and air compressor accessories.
● 6” / 150mm long stem with chrome-plated, which is rust free and allows you to reach the inner wheels without dirty your hands.
● Max pressure of 150 pounds per square inch
● Widely applied for Schrader valve of car, truck, bus, tractor and large vehicle etc.
● Minimum order quantity: 2,000pcs.
-
Dual Head Straight Foot Air Chuck
Part # AC2096
● Dual head is made of zinc alloy, and straight head of push-pull air chuck is specially designed for inner/single wheels or hard-to-touch valves, and 30°reverse head for outer wheels.
● This dual head straight foot air chuck is available for both closed flow and open flow. The closed type is designed with built-in shut-off valve for air line. The air only passed when the air chuck is engaged with a tire valve stem. The open flow type is designed for tire inflator gauge or air pump.
● The dual head straight foot air chuck features 1/4″ female NPT or BSP inlet with 5/8″ / 16mm hex connector, compatible with most air hose, tire inflator and air compressor accessories.
● Both ends of dual head straight foot air chuck lock onto tire valve thread.
● 6” / 150mm long stem with chrome-plated, which is rust free and allows you to reach the inner wheels without dirty your hands.
● Max pressure of 150 pounds per square inch.
● Applied for car, truck, bus, tractor and large vehicle etc. (with Schrader valve)
● Minimum order quantity: 2,000pcs.
-
Clip On Tire Chuck
Part # AC2085
● The clip on tire chuck is open flow air chuck with clips
● Allows chuck to easily clip on to valve threads for hands free tire inflation.
● Designed with 1/ 4 inch Female national thread, 3/4 inch hex
● The clip on tire chuck is compatible with schrader valves, the inflation nozzles of most vehicles, such as car, bus, trailer, motorcycle and bicycle, truck, SUV, electric bike, motorbike, also compatible with wheel pressure gauge and compressor
● Closed flow is also available
● Material: our clip on tire chuck is mainly made of brass which is durable and sturdy, designed with good corrosion resistance and you can use them for a long time
● The maximum air pressure is 250 psi
-
Air Hose Chuck, Euro Style
Part # AC2087
● The air hose chuck equipped with hose barb for 1/4″ hose inner diameter.
● Maximum air pressure of air hose chuck is 150 pounds per square inch
● Both open flow and closed/sealing type air chuck available
● Suitable for use on inflator gauges or air line
● The air hose chuck is designed and manufactured to exacting standards
● Allows chuck to easily clip on to valve threads for hands free tire inflation.
● Compatible with schrader valves, the inflation nozzles of most vehicles, such as car, bus, trailer, motorcycle and bicycle, truck, SUV, electric bike, motorbike, also compatible with wheel pressure gauge and compressor
● Material: mainly made of brass which is durable and sturdy, designed with good corrosion resistance and you can use them for a long time
-
Clip On Tire Air Chuck
Part # AC2095HB
● The clip on tire air chuck is suitable for 1/4″ ID hose
● CNC machined hose barb for high accurate dimension and secured connection with most air hoses
● Maximum air pressure of clip on tire air chuck is 150 pounds per square inch
● Closed/sealing type for use on air compressor or air line.
● Open type also available, for inflator gauge
● Heavy strength yoke is made of thicker steel sheet, which is no deformed or bended in daily use
● Ball foot chuck allows to easily clip on to valve threads for hands free tire inflation.
● Material: clip on tire air chuck is mainly made of brass which is durable and sturdy, designed with good corrosion resistance and you can use them for a long time
-
Ball Foot Air Chuck
Part # AC2094
● The ball foot air chuck could be mounted directly to an air hose
● This ball foot air chuck has a built-in shut-off valve to stop airflow when chuck is not in use
● The air will escape only during inflation (in contact with the tire valve)
● Suitable for 1/4″ ID hose
● CNC machined hose barb for high accurate dimension and secured connection with most air hoses
● Maximum air pressure of 150 pounds per square inch
● The ball foot air chuck is also available in open type for inflator gauge
● Material: mainly made of brass which is durable and sturdy, designed with good corrosion resistance and you can use them for a long time
-
Dual Head Tire Chuck
Part # 192071
• Dual head air chuck is open flow type for tire gauges and inflators
• Dual head air chuck makes tire valves more accessible with the two heads for easier access.
• To inner dual when valve is facing inward. Great for reaching into Dually trucks and other challenging angles
• Dual head air chuck constructed with solid brass head, built to withstand the toughest home garage or shop use
• Maximum pressure rating of 150 psi
• Overall Length: 8”/ 200mm
• 1/4″ female NPT connection
-
Lock On Tyre Chuck
Part # 192098
• Lock on tyre chuck for general commercial and industrial air filling applications.
• Lock on tyre chuck works like a quick coupler; snaps on any tire valve and stays put until released – no need to keep pressure on chuck to keep airflow going
• Lock on tyre chuck is engineered with brass construction, built to withstand the toughest home garage or shop use
• Maximum pressure rating of 300 psi
• 1/4″ female NPT connection
Language:
