-
Professional Tire Inflator with Gauge
Part # 192031
• Professional tire inflator with gauge features 3-in-1 function: inflate, deflate and measure tyre pressure
• 80mm(3-1/8“) pressure gauge (0-12 Bar/174psi)
• 500mm (20“) durable rubber hose
• Professional tire inflator with gauge constructed with aluminum die-casting unit covered with rubber sleeve for extra comfort and durability
• Professional tire inflator with gauge equipped with large and easy-to-read display dial panel.
• Increased safety and reduced tyre-related incidents
• Accuracy: 0-58psi +/- 2psi, exceeds EEC/86/217 -
Pistol Grip Tire Inflator with Gauge
Part # 192034
• The pistol grip tire inflator with gauge features steel trigger with PVC cover for slip-resistance
• 86mm(3-3/8“) pressure gauge (0-7 Bar/100psi) with shock resistant rubber boot which protect the gauge from corrosion, shock and impacts
• The pistol grip tire inflator with gauge is constructed with reinforced molded Nylon housing
• The pistol grip tire inflator with gauge equipped with swivel gauges for any angel reading, and could be flat for storage
• Increased safety and reduced tyre-related incidents -
Dual Foot Inflator Gauge
Part # 192116
• The dual foot inflator gauge features handheld lever throttle which provides precise control of tire inflating or deflating
• Brass valve fitting and polish chrome plated steel finish is rust and corrosion resistance to endure long life span
• Dual foot inflator gauge is constructed with heavy duty cast aluminum body for longevity and durability
• Dual head chuck makes tire valve more accessible.
• Both valve cartridges and gauge of dual foot inflator gauge can be replaced. -
Commercial Tire Inflator With Gauge
Part # 192048
• Fully equipped with a Zinc alloy die casting body w/ a rugged matte black powder coated finish
• Protective case over dial gauge for impact protection, withstands the tough home garage or commercial shop use.
• Push-to-Inflate air filler thumb trigger, and built-in air bleeder valve to quickly air down overinflated tires
• High precision gauge equipped with metal housing, calibrated 10 – 220 PSI.
• 1/4” NPT inlet, BSP thread also available
• Dual head chuck makes tire valve more accessible.
• 5 feet flexible rubber hose with swivel air chuck connector -
Bayonet Inflator Gauge
Part # 192119
• Heavy duty bayonet inflator gauge with brass valve mechanism will provide years of reliable service
• Protective sleeve over dial tube for impact protection, withstands the tough home garage or commercial shop use.
• The bayonet inflator gauge features solid brass bar gauge calibrated 10 – 120 PSI in 2 PSI increments
• The bayonet inflator gauge is constructed with heavy duty cast body which designed for longevity and durability
• Dual head chuck makes tire valve more accessible.
• Max 300 PSI hybrid rubber hose, 1/4” NPT or BSP air inlet -
Bayonet Tire Inflator
Part # 192120
• Lever action trigger and heavy-duty construction, provides long service life even with constant use
• Protective sleeve over dial tube for impact protection, withstands the tough home garage or commercial shop use.
• Complete with a brass indicator bar for easy reading
• Includes a 12 inch hose with a pressure range that offers 10-120 PSI (2 lb increments)
• Clip-on air chuck for one hand operation -
Heavy Duty Tyre Inflator With Gauge
Part # 192038
● Precision engineered for industrial use giving a maximum airline pressure of up to 150 PSI
● Linear gauge reading in PSI with 2psi increment, could be customized for Bar, Kpa etc.
● Tough die cast Aluminum body with steel operating lever and impact absorbing bumper
● Each heavy duty tyre inflator with gauge is performance-tested and calibrated to international accuracy standard: ANSI B40.1 Grade B (2%) and EN12645: 2014
● Air inlet – 1/4 NPT or BSP Female
● Air pressure range: 0 – 150 PSI / 0 – 10 Bar
● The compact design makes it easy to store away
● Ideal for workshops, tyre bays and garage forecourts
● Large magnifier viewing window gives great field of viewing
● Lighter weight provides less work strain and easier for repetitive use
● The heavy duty tyre inflator with gauge is slim line profile, easier to use and less prone to damage when dropped.
● The heavy duty tyre inflator with gauge comes with a rubber grip on chuck which is a dual head and hold on style
● Separated air bleeding valve avoids confusion of inflating and deflating.
● Both valve cartridges and gauge can be replaced. Less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
-
Tire Inflator With Dial Gauge
Part # 192121
• Operation – Inflate, Deflate & Measure
• Tire inflator with dial gauge features rubber bump guard to protect against drops and knocks
• Big thumb operated inflator button and easy access deflator bleed button
• High precision gauge equipped with metal housing, calibrated 10 – 220 PSI.
• Tire inflator with dial gauge has multiple measurements: PSI, Bar, Kpa
• 1/4” NPT inlet, BSP thread also available
• Dual head chuck makes tire valve more accessible.
• Tire inflator with dial gauge equipped with 12” flexible rubber hose -
Heavy Duty Truck Tire Pressure Gauge
Part # 192143
● The heavy duty truck tire pressure gauge is constructed with 2 inch / 50mm dial gauge and 11 inch / 230mm extended dual head straight air chuck.
● Dual head (push-pull) tire chuck make measurement easier when tire valve stem stands in different positions, both inner and outer tires for single and dual tires. Rotatable tire air chuck could be applied to most vehicles, especially to trucks, trailers & RVs. The valve core is made of solid brass, which is corrosion resistant and easily forms a seal with the valve stem.
● The rugged and robust precision gauge is protected by a rubber cover for shock resistance and great grip.
● The quality tire pressure gauge is calibrated to +/- 2% accuracy of full range tire pressure.
● Max pressure of 160 pounds per square inch / 11 bar with increment of 2 psi / 0.2 bar.
● No need batteries and low maintenance, the quality tire pressure gauge is easy to use and reliable in all weather conditions. The durable mechanical construction makes it applied for car, van, light truck, but, truck, SUV, tractor and heavy vehicle etc.
● Build in air bleeder valve is designed for tire deflation and gauge reset after tire pressure measurement.
● Minimum order quantity: 2,000pcs.
-
Quality Tire Pressure Gauge
Part # 192140
● The quality tire pressure gauge features a steel and brass construction with an extended chuck stem. The 360 degree swivel ball foot air chuck fully rotates and makes the gauge access to any position of tire valve so that to get a perfect seal without air leakage.
● The rugged and robust precision gauge is covered by a rubber protector to provide better shock resistance and great grip.
● The quality tire pressure gauge is calibrated to +/- 2% accuracy of full range tire pressure, which meets the standard ANSI B40.1 and EN12645: 2014.
● The gauge ranges range up to 100 psi or 7 bar with increment of 2 psi or 0.2 bar.
● No need batteries and low maintenance, the quality tire pressure gauge is easy to use and reliable in all weather conditions. The durable mechanical construction makes it applied for car, motorcycle, van, light truck, SUV, RV and ATV etc.
● The compact size 1.5 inch / 38mm dial enables the unit to store neatly in glove compartment, center console or tool box, and handy for men and women.
● Pressure hold function, after reading the operator need to release the air inside gauge by press the air bleed valve. The air bleeder valve is also for tire deflation.
● Minimum order quantity: 2,000pcs.
-
Tire Inflator Gun With Gauge, Liquid Filled
Part # 192061
● Liquid filled analog gauge provides high-accuracy measurements.
● The tire inflator gun with gauge contains a built-in tire pressure bleeder valve to drop your pressure to your desired level and reduce pressure in overinflated tires
● The tire inflator gun with gauge features a high flex hose and includes clip-on air chuck for added convenience, more type chucks available.
● 1/4 inch NPT / BSP fitting
● Oil filled pressure gauge measures in PSI (0-230) and Bar (0-16)
● the tire inflator gun with gauge ensure precise air pressure readings on your tires with 1/2 lb. increments and 2% accuracy.
● Liquid absorbs vibration/pressure spikes, reduces wear, and is better in corrosive environments
● Oil filled gauges have a vent valve on the top of the gauge allowing you to totally equalize internal and external pressures, guaranteeing accuracy
-
Tire Inflator Gun With Gauge
Part # 192032
● Measurement range of tire inflator gun with gauge: 0 – 170PSI or 0 -12 Bar
● The tire inflator gun with gauge features measurements in PSI and Bar.
● Compatible with ¼” NPT air compressor’s output
● Performance tested & calibrated accurate to 2% full scale range with display resolution of 0.2PSI for maximum accuracy.
● Built of high quality, heavy duty steel and brass components, the tire inflator gun with gauge provide lasting performance; Use of all vehicles, such as car, SUV, truck, motorcycle, bicycle (with Schrader valve) etc
● Gauge protected by rubber boot.
-
Quality Tyre Pressure Gauge
Part # 192125
● Accurate and reliable: The Quality Tyre Pressure Gauge have been calibrated to international accuracy standards; Index range: 0-100PSI, 0.5-7.5bar.
● Lightweight: Electroplated plastic head and zinc alloy valve stem make this tire pressure gauge lighter and easier to operate.
● Easy to use: No battery is required, and the exhaust button can release excess air in the tire for precise tire pressure adjustment. At the same time, the reading is clear and easy to read.
● With storage box: When the Quality Tyre Pressure Gauge is not in use, you can put it in the storage box to avoid stains and dust and ensure its service life. It is small enough to fit a glove box.
● Application: Suitable for cars, SUVs, RVs, ATVs, bicycles or motorcycles.
● 360 ° swivel joint to take precise measurements in every position of the air connection.
-
High Quality Tyre Pressure Gauge
Part # 192126
● The High Quality Tyre Pressure Gauge is brass and steel construction which built to outlast the competition from plastic gauge. The superior quality steel and brass components are protected by a rugged rubber guard to withstand the toll of a tough day at work
● The 360-degree swivel ball foot air chuck is convenient enough to get a great seal with no air leakage on any tire. This gauge is able to reach awkward valves on cars, trucks, and motorcycles.
● Larger, 2″ glow dial features easy-to-read 60 psi (optional 100psi) single increment scale that glows in the dark, providing accurate readings that “lock” in place until the pressure reset button on the brass neck is pressed.
● An integrated bleed button releases extra air from your tires for precise tire pressure adjustment; Also ideal for motorcycle and bicycle tires with schrader valves.
● With the highest quality materials and workmanship ensuring no air leaks over time, so it’s the last tire pressure gauge you’ll ever need.
● This High Quality Tyre Pressure Gauge is easy to use and is reliable in all weather conditions. A perfect mechanical action accessory for your car, motorcycle, truck, bike, SUV, RV or ATV.
Language:
