-
Dual Head Straight Foot Air Chuck
Part # AC2096
● Dual head is made of zinc alloy, and straight head of push-pull air chuck is specially designed for inner/single wheels or hard-to-touch valves, and 30°reverse head for outer wheels.
● This dual head straight foot air chuck is available for both closed flow and open flow. The closed type is designed with built-in shut-off valve for air line. The air only passed when the air chuck is engaged with a tire valve stem. The open flow type is designed for tire inflator gauge or air pump.
● The dual head straight foot air chuck features 1/4″ female NPT or BSP inlet with 5/8″ / 16mm hex connector, compatible with most air hose, tire inflator and air compressor accessories.
● Both ends of dual head straight foot air chuck lock onto tire valve thread.
● 6” / 150mm long stem with chrome-plated, which is rust free and allows you to reach the inner wheels without dirty your hands.
● Max pressure of 150 pounds per square inch.
● Applied for car, truck, bus, tractor and large vehicle etc. (with Schrader valve)
● Minimum order quantity: 2,000pcs.
-
Automatic Tyre Inflator Machine
Part # 192010
• Automatic tyre inflator machine could automatically inflate or deflate to pre-set pressure when attached to tire valve stem.
• A loud audible warning that can be heard in the noisiest areas when reach target tire pressure.
• Supplied with calibration certificate, accuracy exceeds EC Directive 86/217
• Automatic tyre inflator machine is compatible with Nitrogen generator
• 1/4” inlet and outlet brass adaptor: NPT, BSP or Nitto.
• Large backlit LCD display with audible warning
• Automatic tyre inflator machine is the perfect inflation solution for mechanical workshops, tire service center, quick lube centers, rental car facilities and auto dealers.
• International Protection Rating, IP56, provides weather protection.
• Units are available in 12V, 120V or 240V.
• Inflates accurately with hoses up to 50 m long
-
Air Pump Machine For Gas Station
Part # 192024
• The air pump machine for gas station is designed for the petroleum forecourts, provides safe and accurate tire inflation solution.
• Automatically inflates or deflates any tire to its desired value in seconds
• The air pump machine for gas station adopts mechanical vandal resistant buttons
• Large backlit LCD display with audible warning
• Digital error display
• IP44 rating
• The air pump machine for gas station is powered by: DC12V / AC120V / 240V.
-
Wall Mounted Automatic Tire Inflator
Part # 192020
• Preset the desired pressure, and the wall mounted automatic tire inflator will fill the tire automatically and stop at preset pressure.
• The wall mounted automatic tire inflator will warn the operator with loud audible signal when the tire has reached the desired pressure.
• Wall-mounted unit with 30’ air hose to easily reach all tires on the vehicle.
• 1/4” inlet and outlet brass adaptor: NPT, BSP or Nitto.
• 4 measurement units (psi, bar, kPa, kg/cm2), Overpressure system, LCD screen & backlight.
• The wall mounted automatic tire inflator is perfect inflation solution for mechanical workshops, tire service center, quick lube centers, rental car facilities and auto dealers.
• International Protection Rating, IP44
• Units are available in 12V, 120V or 240V.
• Inflates accurately with hoses up to 50 m long
-
Tire Bead Seating Tool
Part # 192132
● The tire Bead Seating Tool blasting the air out of the tank immediately puts the tires on the rims. The device is suitable for agricultural machinery, trucks, cars and motorcycles.
● It is an essential equipment for any tire workshop. A built-in safety valve that regulates the tank pressure and a built-in gauge that shows the current tire pressure.
● A handle that makes it easier to grasp the inflator by the edge and enables comfortable handling of the device.
● The 2 gallon Bead Seating Tool consists of a sturdy, all-steel, powder-coated tank that is solid and durable enough to remain useful over the long term. Exquisite powder coating makes it rust and corrosion resistant.
● After you have correctly inserted the high pressure tube into the gap between the tire and the rim and quickly turned the valve to ON, you will spend a short time inflating the tire and then turning the valve to OFF.
● Different vehicles require different operating pressures. The gauge can help you accurately read and set the pressure for different vehicles. The pressure of our inflator is between 87-116 PSI.
● A specially designed lip holds the thread barrel at the perfect angle for air supply during bead seating, while the quick release valve distributes air to deliver a full blown of air into the tire.
● The high pressure air inflator is suitable for vehicles, cars, trucks, lawn tractors, tractors, large tractors, RVs, ATVs and more. It’s also convenient for you to take it with the handle.
-
5 Gallon Air Tire Bead Seater
Part # 192131
● The 5 gallon air tire bead seater is suitable for cars, cars, trucks, lawn tractors, tractors, large tractors, RVs, All-Terrain Vehicles, etc. The handle is also convenient for you to take
● The bead seater blasts compressed air between the wheel and the tire bead; it is suitable for vertical and horizontal blasting methods; when the tire is blasted, the edge of the barrel rests on the edge of the wheel to obtain a perfect 40 degree angle
● Fill the air tank with a standard workshop compressor; our tire bead seater can effectively fix tires from small 4″ tires to large 24-1/2″ truck tires.
● Connect the dual head air chuck to the ball valve to turn this pneumatic tire bead blaster into a portable tire inflator; the maximum air pressure of the air tank is 150 PSI, which can be used to set the high pressure seating of the tire bead.
● No need to use soap, ratchet straps and liquids to fix the tires; this tire beat seater is perfect for DIY use in your car or RV; the easy-to-carry handle of the tank is perfect for professional work around busy workshops.
-
Professional Digital Tire Gauge
Part # 192128
This Professional Digital Tire Gauge is a 3-230PSI digital inflator with an accuracy of ± 1PSI and supports 4 switchable units (PSI / KPA / Bar / Kg.cm2). It can be used to test tire pressure, from bikes to heavy trucks.
● This Professional Digital Tire Gauge can display the test value for 2-3 seconds, which is convenient for reading, no more guessing with analog gauges. It has a backlight function and can read clearly even in the dark. It will turn off automatically if no operation within 15 seconds to save battery power.
● This Professional Digital Tire Gauge supports deflation functions. Side deflation valve helps discharge high pressure air, easy to get the right tire pressure for accurate adjustment. Reduce tire wear and improve performance of vehicles.
● This digital tire pressure gauge has 360°rubber air hose and swivel ball foot air chuck, the heavy-duty nozzle can rotate to reach tire valves more easily & flexibility, which makes it easy to connect the tire with Schrader valve without leaking air. It helps to extend the life of tires, improve fuel economy, reduce the load on the vehicle, and allow you to enjoy a comfortable and stable driving.
● Minimum Order Quantity: 1,000pcs
-
Quality Digital Tire Gauge
Part # 192129
● This Quality Digital Tire Gauge ranges 3-230PSI with an accuracy of ±1 psi and supports 4 units (psi / kPa / Bar / Kg.cm2). It can be used to test tire pressure for cars, lawn tractor, tractor, SUV, Pick-up, trucks and heavy vehicles etc.
● The Quality Digital Tire Gauge can display the tire air pressure value for 15 seconds, no need guessing works with mechanic gauges. The backlight function makes it readable clearly even in the dark. The unit will power off automatically in 15 seconds, if no operation, to save battery power.
● The gauge features deflation functions. The air bleeder valve on stem helps to air out high pressure in tire, easy to get the right tire pressure for accurate adjustment, which improves performance of vehicle, reduce tire wear and save gas consumption.
● This Quality Digital Tire Gauge is equipped with flexible air hose and 360 degree swivel ball foot air chuck, that can rotate to reach tire valves more easily & flexibility without leakage. It helps to extend the life of tires, improve fuel economy.
● Minimum Order Quantity: 1,000pcs
-
Digital Dual Head Tire Gauge
Part # 192122
● Ergonomic composite handle, non-toxic, odorless and environmental friendly. Metal connecting rod with Chrome plated and swivel design is wear-resistant and durable. Compatible with RV/Truck tire valve stem, that will maintain correct tire pressure, reduce tire wear and extend tire life
● Dual head (push-pull) tire chuck make measurement easier when tire valve stem stands in different positions, both inner and outer tires for single and dual tires. Rotatable tire air chuck could be applied to most vehicles, especially to trucks, trailers & RVs. The valve core is made of solid brass, which is corrosion resistant and easily forms a seal with the valve stem. Readings in 0.1 PSI increment, giving quick and accurate readings. Setting with 4 units: PSI, Bar, Kpa, Kg/cm. Range: 0-230 PSI or 0-16 Bar.
● One-button operating, convenient to switch between four units simply by pressing the button gently. The Digital Dual Head Tire Gauge is equipped with LED flashlight. LCD display screen with backlight easy to measure and read even in the dark.
● Wide pressure measurement range: 0 – 230 P.S.I., specially designed for heavy vehicles and helps to maintain correct tyre pressure, reduce tyre wear and prolong service life of the tyre. The hanging hole on the end and slim profile is convenient to store or hang anywhere, quite space-saving.
● The digital dual head tire gauge powered by 2 AAA batteries, makes it to use for long time. Easy to replace by taking off back cover. The car tire gauge will automatically shut down in 30s with no operation. The digital dual head tire gauge could be also manually turned off by holding the power button for 5s. Versatile use for cars, trucks, van, Pick-Up, tractor etc.
-
Quality Digital Tire Gauge
Part # 192123
● Advanced: The Quality Digital Tire Gauge with a LED face and measures up between 5 and 150 psi
● Night use: Lighted tip that makes checking tire pressure at night fast and easy
● Comfortable: Ergonomic grip for easy and safe handling of the quality digital tire gauge.
● Versatile: The Quality Digital Tire Gauge measures in psi, kPa and bar
● Reliable: Includes automatic shut off and a long lasting battery
● Non-slip texture and make it easy to hold on
● Engineering plastic shell is both suitable for men and women’s hands
● Designed to maintain correct tire pressure, reduce tire wear and extend tire life as well as save oil consumption
● Pressure Unit Measures PSI, BAR, KPA, and KGF/CM2 on Schrader Valves up to 150PSI | 1000kPA | 10 Bar | 10 kg/cm2
● Backlit LCD display screen and Lighted nozzle provides for clear visibility even in low light settings or at night
● Press “ON/UNIT/OFF” button for control; automatically shuts off within 30 seconds of inactivity
-
Quality Digital Tire Gauge
Part # 192124
● The Quality Digital Tire Gauge can be used to measure cars, bikes, balls, rubber boats and other products. It has a wide range of uses and brings you a safe and healthy journey.
● With the blue backlit LCD display and backlit nozzle, the digital tire pressure gauge is visible in dimly lit areas and helps adjust the nozzle to the valve for a good seal.
● Digital display for clear and accurate readings with high precision in steps of 0.1. 4 units with a range: 0-150 PSI / 0-10 bar / 0-10 kg / cm² or 0-1000 KPA; No more guessing with analog measuring devices.
● One button with 3 functions: ON / UNIT / OFF, non-slip texture and ergonomic handle make it easy to hold on. Automatic shutdown in 30 seconds to save electricity.
● Align the pressure cock on the tire, then squeeze firmly to keep the air tight. The Quality Digital Tire Gauge automatically displays the measured value.
● Minimum Order Quantity: 2,000pcs
-
Quality Digital Tire Gauge
Part # 192141
● LCD Display with Backlit – Digital tyre pressure gauge features large LCD Display with backlight. It is easy to read tire pressure even in dark environment, suitable for day and night use.
● High Accuracy – Each unit is calibrated before package. The certified accuracy ensures tire pressure readings accurate. The measurement ranges up to 120 PSI / 10 Bar and conforms to ANSI B40.1 (±1% accuracy of full range).
● Convenient to Use – the tyre pressure gauge will automatically display the air pressure value within 15 seconds after press the unit on tire valve stem, no need guessing works with mechanic gauges. And the gauge will automatically shut off in 30 seconds without operation. Units can be alternated between Psi, Bar, Kpa, kgf/cm. The maximum measured 120 PSI / 10kgf/cm² makes the air pressure tire gauge suitable for motorcycle, car, lawn tractor, tractor, SUV, Pick-up, trucks and heavy vehicles etc.
● Compact – Ergonomic design makes it handy for operation, no matter for man or women. Compact profile is convenient for store in glove compartment.
● Built to Last: with the highest quality composite plastic materials and workmanship ensuring no air leaks over time, so it’s the last tire pressure gauge you’ll ever need.
● Minimum Order Quantity: 2,000pc
-
Digital Tyre Pressure and Tread Depth Gauge
Part # 192111
● The digital tyre pressure and tread depth gauge is convenient for operation, four buttons on front panel: mode switching between Tread Depth and Tyre Pressure Measurement, Unit Conversion, On/Off and Reset, Backlight and Flashlight.
● The digital tyre pressure and tread depth gauge is equipped with a flashlight, which can help to find the tire valve in the night or dark environment.
● Clear and super bright easy-to-read LCD screen, which is without blind area and can be clearly read from any angle. The backlight makes the reading easily in darkness.
● The digital tyre pressure and tread depth gauge is designed in compact size, which makes it portable and easy to store in glove compartment, central console or tool box or tool bag without worrying about loss or damage. The composite engineering material features light weight and handy for man and women.
● The digital tyre pressure and tread depth gauge features two function: tyre pressure measurement and tyre wear depth checking, which provides more driving safety.
● The unit will display an illegal tyre tread depth warning when it is 1.6mm or less.
● It could be applied for your car, van, motorcycle, SUV, RV, tractor and truck etc.
● The gauge will automatically shut down after 90 seconds without operation to save batter power.
● Minimum order quantity: 1,000pcs
-
Digital Tire Tread Gauge
Part # 192144
● The digital tire tread gauge is designed for different car tires tread measurement and also suitable for brake shoe, pad wear, a handy tool for both DIY and professional mechanics.
● There are three buttons on front panel: inch / mm switching; On/Off and Zero.
● The measuring value could be displayed in both inch and mm.
● Large easy-to-read LCD with backlight, measure range: 0 – 25.4mm or 0 – 1 inch with increment of 0.01mm or 0.0005 inch. The backlight makes the reading easily in darkness.
● The digital tire tread gauge features compact size, which makes it portable and easy to store in glove compartment, central console or tool box or tool bag without worrying about loss or damage.
● The sturdy engineering plastic material makes it light weight and convenient for operation.
● Automatic power off to save batter power.
● The digital tire tread gauge can be zeroed at any position for easier adjustment.
● It can be applied for your car, van, motorcycle, SUV, RV, truck and bus etc.
● Minimum order quantity: 1,000pcs
-
Tire Inflator Gun With Gauge, Liquid Filled
Part # 192061
● Liquid filled analog gauge provides high-accuracy measurements.
● The tire inflator gun with gauge contains a built-in tire pressure bleeder valve to drop your pressure to your desired level and reduce pressure in overinflated tires
● The tire inflator gun with gauge features a high flex hose and includes clip-on air chuck for added convenience, more type chucks available.
● 1/4 inch NPT / BSP fitting
● Oil filled pressure gauge measures in PSI (0-230) and Bar (0-16)
● the tire inflator gun with gauge ensure precise air pressure readings on your tires with 1/2 lb. increments and 2% accuracy.
● Liquid absorbs vibration/pressure spikes, reduces wear, and is better in corrosive environments
● Oil filled gauges have a vent valve on the top of the gauge allowing you to totally equalize internal and external pressures, guaranteeing accuracy
-
Tire Inflator Gun With Gauge
Part # 192032
● Measurement range of tire inflator gun with gauge: 0 – 170PSI or 0 -12 Bar
● The tire inflator gun with gauge features measurements in PSI and Bar.
● Compatible with ¼” NPT air compressor’s output
● Performance tested & calibrated accurate to 2% full scale range with display resolution of 0.2PSI for maximum accuracy.
● Built of high quality, heavy duty steel and brass components, the tire inflator gun with gauge provide lasting performance; Use of all vehicles, such as car, SUV, truck, motorcycle, bicycle (with Schrader valve) etc
● Gauge protected by rubber boot.
-
Quality Tyre Pressure Gauge
Part # 192125
● Accurate and reliable: The Quality Tyre Pressure Gauge have been calibrated to international accuracy standards; Index range: 0-100PSI, 0.5-7.5bar.
● Lightweight: Electroplated plastic head and zinc alloy valve stem make this tire pressure gauge lighter and easier to operate.
● Easy to use: No battery is required, and the exhaust button can release excess air in the tire for precise tire pressure adjustment. At the same time, the reading is clear and easy to read.
● With storage box: When the Quality Tyre Pressure Gauge is not in use, you can put it in the storage box to avoid stains and dust and ensure its service life. It is small enough to fit a glove box.
● Application: Suitable for cars, SUVs, RVs, ATVs, bicycles or motorcycles.
● 360 ° swivel joint to take precise measurements in every position of the air connection.
-
High Quality Tyre Pressure Gauge
Part # 192126
● The High Quality Tyre Pressure Gauge is brass and steel construction which built to outlast the competition from plastic gauge. The superior quality steel and brass components are protected by a rugged rubber guard to withstand the toll of a tough day at work
● The 360-degree swivel ball foot air chuck is convenient enough to get a great seal with no air leakage on any tire. This gauge is able to reach awkward valves on cars, trucks, and motorcycles.
● Larger, 2″ glow dial features easy-to-read 60 psi (optional 100psi) single increment scale that glows in the dark, providing accurate readings that “lock” in place until the pressure reset button on the brass neck is pressed.
● An integrated bleed button releases extra air from your tires for precise tire pressure adjustment; Also ideal for motorcycle and bicycle tires with schrader valves.
● With the highest quality materials and workmanship ensuring no air leaks over time, so it’s the last tire pressure gauge you’ll ever need.
● This High Quality Tyre Pressure Gauge is easy to use and is reliable in all weather conditions. A perfect mechanical action accessory for your car, motorcycle, truck, bike, SUV, RV or ATV.
-
Clip On Tire Chuck
Part # AC2085
● The clip on tire chuck is open flow air chuck with clips
● Allows chuck to easily clip on to valve threads for hands free tire inflation.
● Designed with 1/ 4 inch Female national thread, 3/4 inch hex
● The clip on tire chuck is compatible with schrader valves, the inflation nozzles of most vehicles, such as car, bus, trailer, motorcycle and bicycle, truck, SUV, electric bike, motorbike, also compatible with wheel pressure gauge and compressor
● Closed flow is also available
● Material: our clip on tire chuck is mainly made of brass which is durable and sturdy, designed with good corrosion resistance and you can use them for a long time
● The maximum air pressure is 250 psi
-
Air Hose Chuck, Euro Style
Part # AC2087
● The air hose chuck equipped with hose barb for 1/4″ hose inner diameter.
● Maximum air pressure of air hose chuck is 150 pounds per square inch
● Both open flow and closed/sealing type air chuck available
● Suitable for use on inflator gauges or air line
● The air hose chuck is designed and manufactured to exacting standards
● Allows chuck to easily clip on to valve threads for hands free tire inflation.
● Compatible with schrader valves, the inflation nozzles of most vehicles, such as car, bus, trailer, motorcycle and bicycle, truck, SUV, electric bike, motorbike, also compatible with wheel pressure gauge and compressor
● Material: mainly made of brass which is durable and sturdy, designed with good corrosion resistance and you can use them for a long time
Language:
